Hydraulic System
Joy-Stick with electronic control which powers up to 7 fluid power takeoffs.
This allows you to control the hydraulic system easily and safely. The joystick is easy accessible on the console and rotates with the steering column.
1. Control levers for fluid power takeoffs
2. Air filter with cyclone prefilter
3. Controls for fluid power takeoffs
2. Air filter with cyclone prefilter
3. Controls for fluid power takeoffs
Distributors: these can have up to 8 fluid power takeoffs. In the AR version, the distributors are located above the mudguards and feature an oil recovery system.
In the RS version, they are found inside the mudguards, while in the MT they are next to the middle mudguard SX.
This makes the tractor easier to operate, ensuring maximum visibility even behind.
Rear power takeoff with electrohydraulic control: independent from the gears and synchronized with all the forward speeds. It can be engaged under load with the brake disengaged. The independent PTO has a speed of 540/750 rpm in the AR and RS
versions and 540/1000 rpm in the MT versions.
The MT model features the standard nitrogen cylinder, the cyclone filter and a ram lift with quick couplings.
The hydraulic system consists of two circuits with independent pumps and a heat exchanger. The pump comes with the hydroguide and has a flow rate of 31lt/min, while
the service pump has a flow rate of 49 l/min. The system has a hydraulic pressure of 180 bars. All this allows you to use combined equipment and rationalize the use of the vehicle, reducing processing time.
Rear lift: the robust rear lift has a maximum force of 2300 kg. Available with external rams with position and draft control, it guarantees excellent performances in total safety, even
with heavy equipment. The three-point hitch, with normal or quick couplings, can have a hydraulically controlled top link and right drawbar.
Front lift: optional, guarantees a maximum force of 800 kg and comes with four fluid power takeoffs.
A wide range of tyres. The width of the tractors, the firmness of the terrain, the grip level and many other aspects make wheels fundamentally important when choosing a vehicle. The wide variety of tyres available can adapt the Vega, perfectly to any type of use.
In the RS version, they are found inside the mudguards, while in the MT they are next to the middle mudguard SX.
This makes the tractor easier to operate, ensuring maximum visibility even behind.
Rear power takeoff with electrohydraulic control: independent from the gears and synchronized with all the forward speeds. It can be engaged under load with the brake disengaged. The independent PTO has a speed of 540/750 rpm in the AR and RS
versions and 540/1000 rpm in the MT versions.
The MT model features the standard nitrogen cylinder, the cyclone filter and a ram lift with quick couplings.
The hydraulic system consists of two circuits with independent pumps and a heat exchanger. The pump comes with the hydroguide and has a flow rate of 31lt/min, while
the service pump has a flow rate of 49 l/min. The system has a hydraulic pressure of 180 bars. All this allows you to use combined equipment and rationalize the use of the vehicle, reducing processing time.
Rear lift: the robust rear lift has a maximum force of 2300 kg. Available with external rams with position and draft control, it guarantees excellent performances in total safety, even
with heavy equipment. The three-point hitch, with normal or quick couplings, can have a hydraulically controlled top link and right drawbar.
Front lift: optional, guarantees a maximum force of 800 kg and comes with four fluid power takeoffs.
A wide range of tyres. The width of the tractors, the firmness of the terrain, the grip level and many other aspects make wheels fundamentally important when choosing a vehicle. The wide variety of tyres available can adapt the Vega, perfectly to any type of use.
- A Wheels 250/80-18 280/70-18 11.5/80-15.3 320/65-18 340/65-18425/55-17
AC70G 8.00-20 9.50-20 11.2-20 300/70-20 320/70-20 340/65-20
Wheels with ‘TRACTOR’ profile, suitable for typically agricultural use, for working
the land and towing, or whenever you need excellent grip to exploit the tractor’s performance to the full.
- B Wheels 31x15.50-15 XTC 38x14.00-20 STG
- C Wheels 31x15.50-15 STG 425/55-17 All Ground
Wheels for soft track surfaces, ideal for use in maintenance and crop land, or whenever you need to protect the land from tyre pressure without losing grip.
- D Wheels 38x14.00-20 Soft-Track
Wheels for very soft track surfaces, essential for maintenance of parks and lawns with a minimum surface impact.
